機電一體化英文簡歷

時間：2020-11-16 19:49:41 英文簡歷模板我要投稿

機電一體化英文簡歷模板范文

　　其實，英文簡歷也是求職的“敲門磚”，又是求職的.介紹信，對大學生求職的成功具有舉足輕重的作用。以下是機電一體化英文簡歷模板范文，歡迎閱讀!

機電一體化英文簡歷模板范文

　　機電一體化英文簡歷模板范文一

　　YJBYS

　　Nationality:China (Mainland)

　　Current Place:ZhaoqingHeight/Weight:170 cm?58 kg

　　Marital Status:marriedAge:32 years

　　Career Objective

　　Application type:Jobseeker

　　Preferred job title:Quality Management/Testing Manager((QA/QC Manager): surpviser 、 Chief Engineer/Assistant Chief Engineer: 、 Quality Management/Testing Supervisor((QA/QC Engineer):

　　Working life:8Title:No title

　　Job type:Full timeExpected Start date:In two weeks

　　Expected salary:￥5,000--￥8,000Preferred working place:Guangdong province Zhejiang Jiangsu

　　Work experience

　　Company's name:LV company (leggett & platt)Begin and end date: 2002-12-2012-03

　　Enterprise nature:Sino-foreign joint venturesIndustry: Mechanics/Electrical Equipment/Heavy Industry

　　Job Title: Technic chief / DC motor technical engineer

　　Job description: 1.Join in the APQP work of project management and tracking

　　2.Join in DFMEA analysis and discuss, assist r&d engineers to design and improve products.

　　3.Leading process flow design, PFMEA analysis, control plan and WI.

　　4.leading new product trial parts and PPAP work, 5.process capability analysis and process optimization, the appraisal, workshop working plane and layout. 6.design assembly fixture & tooling, Poka Yoke devices. 7.Product quality defect analysis and improve product quality and consistency.8. Responsible for company ISO14001 / OHSA18001 management system implementation and operation.

　　2006.12 - yet guangdong zhaoqing LV machinery Co., LTD As Process supervisor 1.Assist process manager management work.

　　2.communication production technology with the customer

　　3.customer on-site technical service

　　2008.10-2008.12 study and work In Germany.Mainly studies the project management, customer service and technical support,Learn German way of working and working attitude.

　　Reasons for leaving: for more inprove

　　Company's name:Hengyan kejing micro electronic companyBegin and end date: 2002-05-2002-12

　　Enterprise nature:Sino-foreign joint venturesIndustry: Mechanics/Electrical Equipment/Heavy Industry

　　Job Title: Technician of R@D

　　Job description: Silicon chips for the processing and technical development, including the grinding and polishing pin silicon, and enlarge boron etc. Responsible for compiling process files with the workshop of employee training.

　　Responsible for new product development. Participated in N < 100 > substrate diffusion, polishing process - 02114201.7 process patent (70) H01L29 / research and development.

　　Reasons for leaving: company have a long time free

　　Company's name:Shantou DaCheng packing machineryBegin and end date: 2001-04-2002-04

　　Enterprise nature:Private enterprisesIndustry: Mechanics/Electrical Equipment/Heavy Industry

　　Job Title: Mechanical Technician

　　Job description: Mainly responsible for the design of mechanical parts, machining process of the parts

　　Reasons for leaving:

　　Educational Background

　　Name of School:Heng Yang Branch, Hunan university

　　Highest Degree:AssociateDate of Graduation:2001-06-01

　　Name of Major 1:machine and electronicName of Major 2:

　　Education experience:Start dateEnd dateEducation organizationMajorsCertificateCertificate No

　　1998-092001-06Heng Yang Branch, Hunan universityMachine and electronicmachine and electronic1

　　2004-042004-07Guangdong university of business studiesSpoken english

　　2004-082004-08SGSISO/TS 16949 PPAP

　　2004-082004-08SGSLean production

　　2004-082004-08ZhongjianISO14001Internal auditor

　　2007-082007-08SGSISO/TS 16949Internal auditor

　　2008-032008-06BodeJapanese

　　Language Ability

　　Foreign Language:EnglishLevel:good

　　Chinese level:excellentCantonese Level:normal

　　Relevant skills and abilities

　　I have strong knowledge of mechanical, electrical engineering, Familiar with the relay control circuit, Proficient in Microsoft office software, master PRO/E AUTOCAD software, etc. In jig design system is relatively rich experience. Good English reading and writing ability, can the independent reading and handle English material, can perform simple dialogues.

　　In guangdong zhaoqing LV machinery Co., LTD as during the process engineer, mainly responsible for DC motor technology, make myself in mechanical design and dc motor design and manufacture process is very familiar with, can deal with the various problems in production line. Have experience in solving nosie and vibration of motors or actuators.

　　At the beginning of 2005-2006 year-end responsible for the company's new project process design work, have stronger organization and coordination ability, good management of the new project work, and at the same time also and cultivate their ideas.

　　Since 2006 as process supervisor, cultivate myself management ability and the ability to analyze the problem. In customer service training their communication ability.

　　Ever work in Japan and Germany communication with customer, Honda and Toyota and nissan / / component suppliers work oems. So very familiar with foreign enterprises with the work attitude.

　　I have strong mistake proofing consciousness, and have the mistake proofing design experience. Once had three new design and leading the line project.Lean production and the continuous improvement of practical experience.

　　While at work during the training, very familiar with QS900 / TS16949 quality management system, grasps the APQP/PPAP/SPC/MSA/DOE related knowledge. I 2004.8 in December is leading company ISO14001 / OHSAA18001 management system implementation of work, and use the company through a one-time two system authentication.

　　In these years, exercises myself during the working ability to pressure, wholly foreign-owned enterprises and auto parts industry working process and way of working. At the same time through the training and learning in Germany, understand the foreign people the rigorous work attitude and way of thinking, understand how to communicate with customers and handle problems. Promoted their depth of understanding and dealing with problems.

　　Self-recommendation letter

　　1.I honest, sincere, Conscientious, Enthusiastic help colleague, unity.

　　2.for their work, must be completed within the stipulated time, well.

　　3.good at learning, to work on the problem, don't understand, ask a colleague, find information must understand and understand.

　　4.good management, work in good order.

　　5.work perseverance and patience, can quickly adapt to the new environment.

　　But after work often feel oneself are as follows:

　　1.basic knowledge, knowledge is not widely to learn more.

　　機電一體化英文簡歷模板范文二

　　YJBYS

　　Sex: Male

　　Date of Birth: September 17, 1985

　　Height: 171 cm marital status: unmarried

　　Account location: Xi'an, Shaanxi

　　Location now: Guangdong Zhongshan Torch Development Zone

　　Personal strengths: singing painting Internet

　　Language ability

　　Mandarin: excellent grasp dialect: Shaanxi ability: excellent

　　English: General Rating: 1

　　Other languages: capacity: Rating:

　　Education or training experience

　　Graduate institutions: the University of Xi'an, the highest trade union education: college

　　Specialties: Electrical and Mechanical Technology

　　Time to local schools / institutions of professional qualification certificate No. 2004.9 - 2008.1 Xi'an University of Electronic Commerce trade union Electrical Technology College

　　Work experience

　　2007.5 - 2008.5 Baofeng Die Co., Ltd. (wholly foreign-owned) jobs: Operator separation reasons: work home Description: the environment is better to do .......... cnc machine parade 2006.5 - 2007.5 Guangzhou more Feng Electronics Co., Ltd. (wholly foreign-owned) jobs: Technician reasons for leaving: Job Description: also ....

　　Job intentions

　　Job search intention: Mechatronics qc. Seized goods business with a single job-location: Zhongshan, Zhongshan, Zhongshan

　　Job Time :2008-8-5 can be reported for duty time: any time

　　Work experience: more than a year wage demands :1500-3500

　　Nature of work: Full-time

　　Self-evaluation

　　1. Response to sharp and good at analysis; has a strong team spirit, able to travel.

　　2. Be able to speak fluent Putonghua, the language expression ability, can be hard, good communication.

　　3. With more than 1 year experience in cnc machine CNC parade; know how to use basic test instruments.

　　I hope that I can be your company the opportunity, I will not live up to the expectations of companies.

【機電一體化英文簡歷模板范文】相關文章：

機電一體化專業(yè)英文簡歷模板07-22